GP200B Wall and Floor Printing Machine: Rotate the Print Unit, Keep the Rails

One wall and floor printer for sign companies, print shops, decoration contractors and mural studios whose clients order floor graphics in the same space as the wall. The print unit turns from the wall to the floor in about 2 minutes, and the rails stay where they were laid.

Get a GP200B quotation Full specification table
≈2 minWall position to floor position, base stays on its rails
  • 2.5 / 3 / 4 mWall height: standard, option, custom
  • 2.3 mPrinted floor width on a 3 m rail
  • 10 kgControl box, lifts off and carries by hand
  • ZL 2024 3 0255771.XRegistered design patent
GP200B wall and floor printing machine in the wall position, column and control box beside a finished wall print Wall position2.5 m standard, custom to 4 m
FIG. 01 · GP200B at the wall
GP200B wall and floor printing machine with the print unit rotated to the floor position over its rail frame Floor position3 m rail, prints up to 2.3 m wide
FIG. 02 · the same machine, unit turned to the floor

Businesses That Sell Wall and Floor Graphics to the Same Client

The GP200B fits a business whose clients want floor graphics in the same space as the wall graphics, printed by the same team with one machine.

Showroom with a meeting table, display shelving and printed panels, the kind of room finished as a whole
FIG. 03 · a showroom finished as one room
GP200B in the floor position over a watercolour unicorn graphic printed on the floor inside its rail frame
FIG. 04 · a floor graphic printed inside the rail frame

  • Sign and advertising companies

    Store launch · seasonal campaign

    A launch often pairs a branded wall with promotional graphics on the floor in front of it; the install team prints both on one visit.

  • Large-format and commercial print shops

    Exhibition stand · event venue · pop-up

    Stands and pop-ups mix wall panels with floor graphics, and both are prepared in the artwork workflow the shop already runs.

  • Renovation and decoration contractors

    Showroom · office · café · reception

    A printed feature wall and a printed floor zone go into the same fit-out, with no second subcontractor on site.

  • Mural studios and wall printing businesses

    Floor pieces · tall lobbies · stairwells

    A studio that already prints walls adds floor pieces without a second machine, and a custom 4 m build reaches taller lobbies and stairwells.

  • Distributors and OEM partners

    Own brand · custom logo on the body

    The body carries a custom logo, so the machine is supplied under the partner's own brand, and its external design is registered as Chinese design patent ZL 2024 3 0255771.X. Supply terms: Wall Printer Wholesale and OEM

    GP200B column with a logo panel near the top and a lit WALL PRINTER box at the base

Rotating Print Unit: Wall to Floor in About 2 Minutes

Nothing on the wall and floor printing machine is taken apart. The base stays on its rails, the rails stay where they were laid, and the print unit turns from facing the wall to facing the floor.

GP200B print head unit facing the wall on the vertical rail, with ultrasonic sensors and ink tank block above it

Wall position

The print head unit, which folds and telescopes, runs up and down the vertical rail.

Stays the same for both jobs

  • Base on its rails
  • Floor rails under the machine
  • Control box
  • Ink set and printheads
  • Control software and files
  • The operator

The operator who runs the wall print makes the switch; remote training from an engineer covers walls and floors.

GP200B print unit rotated so the head faces the floor, ink tank caps on top and the floor rail beside it

Floor position

The unit is rotated so the head faces down and works across the 3 m floor rail, printing up to 2.3 m wide.

Order of Work on a Wall and Floor Job

  1. Finish the wall printThe image cures under the LED UV lamp as it prints.
  2. Rotate to the floor, ≈2 minThe base stays on its rails.
  3. Load the floor fileSame artwork batch, same control software, or sent over WiFi.
  4. Print the floor graphicAcross the 3 m rail, up to 2.3 m wide.
  5. Rotate backWhen a second wall follows the floor.

Common industry practice with column-type wall printers is to rebuild the machine between a wall setup and a floor setup, which takes about 20 minutes. The GP200B turns its unit instead, so a wall and a floor in the same space become one site visit.

GP200B, rotate the unit
≈2 min
Column-type rebuild, common practice
≈20 min
3 m rail up to 2.3 m printed
FIG. 05 · plan view, printable floor band inside the 3 m rail

Floor artwork is laid out at 2.3 m wide or less; send your floor sizes and we check them. The GP200B is the only one of our three series that prints floors.

Floor durability and slip resistance depend on the floor coating or protective laminate specified for the project and should be tested before use. Floor jobs and their preparation: Floor Graphics Printing

Rails laid once. Machine assembled once. Walls and floors printed in the same visit.GP200B · wall ⇄ floor ≈2 min

Portable Build: 10 kg Control Box, 40 cm Transport Height, Two Bases

The GP200B splits into pieces one person can handle, and it runs on either a wheeled base or floor rails, fixed in the quotation along with the printhead and ink set.

Control box, carried by hand
10 kg
Frame
folds down
Vertical rail
folds, removable
Print head unit
folds, telescopes
Flight case
trolley handle

The control box connects to the frame with aviation plugs, so on a site with stairs, a narrow corridor or a lift the frame and the box go in separately. Packed, the machine fits a trolley-handled flight case that goes in the boot of a car.

40 cm
High with the vertical rail removed, stands upright
60 kg
Net weight
120 kg
Packed for shipping from the factory

Wheeled base

  • Rolls along the wall
  • For sites where no rails are laid

Floor rails

  • Belt-driven carriage on the rails
  • High load, keeps its height over long use
  • Image width extends with added rail sections
GP200B control box marked WALL PRINTER at the foot of the column on its wheeled base, plugged in by cable
FIG. 06 · control box at the foot of the column
Black aluminium-edged flight case closed on a warehouse floor
FIG. 07 · flight case
Dismantled wall printer loaded into the open boot of a saloon car
FIG. 08 · loaded into a car boot
GP200B wall and floor printing machine, front view on its rail frame, white background

GP200B Wall and Floor Printing Machine Specifications

Every figure for the GP200B wall and floor printing machine in one place, grouped the way a quotation is set up. Speed, ink, curing, software and power are shared by our three series.

Wall Margins and Image Position

Margins are 20 cm top, 50 cm bottom, 15 cm left and 40 cm right. On the standard 2.5 m build the image runs from about 0.5 m to about 3 m above the floor; your designer places the artwork inside that band and checks it against beams and fittings on site.

printed image bottom 50 cm top 20 cm right 40 cm left 15 0.5 m 3 m floor
FIG. 11 · elevation, standard 2.5 m build

Wall Print Height

2.5 m standard, 3 m as an option and up to 4 m on a custom build. The height is set when the machine is built, so tell us the tallest walls your clients ask for and the build goes into the quotation.

Printheads

Four original Epson options: DX10 (1080 nozzles), DX7 (1440), I1600 (1600) and I3200. Per the factory, heads with more nozzles print faster, are less prone to ink dropout and last longer, and they cost more. Send your expected monthly print area and we suggest one; options are compared on Configurations & Customization

Software and WiFi Transfer

Wall and floor jobs run in the same control software, and images can be sent to the machine over WiFi. A new operator learns the basic print workflow in about 10 minutes. Daily care and remote support: Maintenance & Support

Printing area
PrintingWalls and floors
Wall-to-floor switchAbout 2 minutes, by rotating the print unit; rails stay in place
Wall print height2.5 m standard, 3 m option, custom up to 4 m
Standard wall image2.5 m × 6 m, width extended with rail sections
Floor rail width3 m
Floor print widthUp to 2.3 m
Wall marginsTop 20 cm, bottom 50 cm, left 15 cm, right 40 cm
Frame and transport
BaseWheeled or rail; works with or without rails
DriveBelt drive on floor rails
Vertical railFoldable
Print head unitFolds and telescopes
Control boxDetachable, 10 kg, hand-carried
Transport height40 cm with the vertical rail removed
TransportFlight case with trolley handle
ConnectionsAviation plugs throughout
Weight60 kg net · 120 kg packed
Print and ink
PrintheadsDX10 (1080 nozzles) / DX7 (1440) / I1600 (1600) / I3200, original Epson
Print speedDraft ≈8 m²/h · Standard ≈8 m²/h · High-res ≈5 m²/h
InkUV ink, CMYK or CMYK + W, white ink stirring
Droplet / precision3.0 pl · 2880 dpi nominal
CuringLED UV as it prints, adjustable temperature and intensity; UV-cured, water- and UV-resistant finish
Surface trackingDual ultrasonic sensors, up to 1.5 cm unevenness
Ink systemElectric suction, moisturising cap, low ink alarm
SurfacesOrdinary painted or plastered walls print directly once dry and flat; only smooth, non-absorbent surfaces such as glass, tile, metal and acrylic take a coating first. Also wood and brick; application-dependent, sample testing recommended
Software, power, patent and warranty
SoftwareBetterPrint control, Ultraprint RIP, Maintop supported
File formatsTIFF, PDF, JPEG, PNG; CMYK, 300 dpi or more
LanguagesChinese, English, Russian and many other languages
InterfaceUSB 3.0, WiFi image transfer
PowerSingle-phase AC 110-220 V, 2000 W, 50-60 Hz; UPS optional
Working conditions10-35 °C, wind force 0-5
Custom optionsLogo on the body, height up to 4 m
Design patentZL 2024 3 0255771.X (China)
Certificates / warrantyCE certificates issued to the manufacturer; 2-year whole-machine warranty, ink and printhead connectors excluded (Maintenance & Support · About Us)

Send Your Wall Heights and Floor Widths

We check them against the 2.5 m, 3 m and custom 4 m builds and the 2.3 m floor print width, and reply with a GP200B configuration.

Request a GP200B quotationWhatsApp +86 18571639620

Wall and Floor Printing Machine Beside the Wall-Only GP200 and UP200

Of our three series, the GP200B is the one that prints floors as well as walls, and the one that can be built for walls up to 4 m. The full comparison is on UV Wall Printers

GP200B front view cut out, column with control screen and wheeled base

GP200B

  • 60 kg
  • walls and floors
  • up to 4 m

Wall and floor graphics in one visit, and tall walls on a custom build. You are on this page.

GP200 digital wall printer on its rail frame, white background

GP200

  • 45 kg
  • walls
  • 2.5 m

20 cm margin on every side; one person sets it up in about 10 minutes. The lighter machine for wall-only work at changing sites.

UP200 column wall printer on its rail frame, white background

UP200

  • 70 kg
  • walls
  • column on rails

Built-in resume after a power cut, for long print days at one wall.

Request a GP200B Wall and Floor Printing Machine Quotation

Tell us which wall and floor jobs you quote, the wall heights you meet most often, your usual floor widths and the surfaces you print on. The reply names the GP200B height build, base, printhead and ink set. Sample prints on your surface can be arranged on request.

Surfaces you print on
Options